A construction website brings together a wide range of content: technical guides on materials, planning regulations, guides to reading plans, and directories of professionals. The site map (or sitemap) is the page that lists all this content in a logical hierarchy. Knowing how to use it makes it easier to find specific information without clicking through dozens of pages or relying on an internal search engine that may not always deliver accurate results.
Construction website sitemap: what this page is for
An HTML sitemap is a public page that presents all the sections and subsections of a website in a hierarchical list. On a construction portal, these sections often cover a wide range of topics, including structural work, carpentry, insulation, administrative procedures and cost-estimating tools.
Its main purpose is to provide a structured overview of the content available. While the navigation bar shows only the main categories, the sitemap goes all the way down to individual articles. Whether you’re a homeowner looking for the difference between a site plan and a location plan, or a professional trying to find a guide to seismic standards, it can save you a lot of time.
For example, the Bien Construire! site map organizes its content into broad categories (new construction, renovation and extensions), then breaks down each subtopic, making it easier to find your way around a resource-rich website.
Site plan, location plan, cross-section plan: finding the right document on the website
Construction websites regularly publish guides to the different types of plans used in planning applications. Before exploring the sitemap, it helps to know which document meets which need. Three types of plans come up in almost every construction project.
- The location plan shows where the plot is within the municipality. It helps identify the applicable Local Urban Development Plan (PLU) zoning and any easements.
- The site plan shows the project on the plot: building footprint, distances from boundaries, access, utility connections and landscaping. It distinguishes between what will be retained, built, demolished or modified.
- The cross-section plan shows the natural ground profile compared with the profile after the work is completed. It is required whenever a project changes the terrain or the plot is sloped.
On a well-structured website, these three types of plans have their own pages, often grouped under a section such as “planning application” or “building permit”. The sitemap lets you check in seconds whether the cross-section plan is covered separately or included in a broader guide.

Orientation, scale and plot boundaries: what to look for first
When a construction article includes a site plan, the first things to look for are the orientation (north) and the graphic scale. Without these two reference points, it is impossible to interpret the building’s dimensions and position correctly.
The graphic scale shows the relationship between a distance measured on the document and the actual distance on the ground. It usually appears as a graduated line at the bottom of the plan. Orientation is indicated by an arrow pointing north, often placed in the margin of the drawing.
Next, identify the plot boundaries. Depending on the drafter’s conventions, they may be shown as solid or dashed lines. One point to keep in mind: a cadastral plan is not an official boundary survey. If a decision depends on the exact position of a boundary—such as where to build a shared wall or how far to set a structure back—only a licensed surveyor can establish it with certainty.
Reputable construction websites make this clear in their guides, but the warning is sometimes tucked away at the bottom of the page. The sitemap helps you find the dedicated guide to the cadastre or boundary surveys, rather than relying on a passing mention in an article about something else.
Online resources for assessing a project site
In addition to private construction portals, several free public tools can help you assess a plot before starting a project.
Cadastre and Géoportail
The cadastre.gouv.fr website remains the starting point for downloading cadastral plans, including in DXF format for use in drawing software. The IGN’s Géoportail adds to this information by overlaying aerial photographs, topographic maps and elevation data in a single interface.
Heritage Atlas and PLU
The Ministry of Culture’s Heritage Atlas indicates whether a plot lies within a protected historic monument area, in which case consultation with an Architecte des Bâtiments de France is required. For local planning rules, consulting the PLU at the town hall or on the urban planning geoportal provides information on buildable zones, maximum permitted heights and mandatory setbacks.
These tools are often listed and explained in the “resources” or “tools” sections of construction websites. Checking the sitemap of the website you’re visiting lets you see whether it has a dedicated page for these free mapping tools and go straight to it.

Reading a plan as a comparison between existing conditions and the proposed project
A common mistake is to view a site plan as a simple, static aerial view. In reality, it should be read as a comparison between the current state of the plot and its future state. Each element is identified as retained, added, modified or removed.
Vehicle and pedestrian access, planting (trees to be retained, removed or planted), fences and utility connections are all shown on this document. If the project affects the terrain, the cross-section plan provides additional context by showing the natural ground profile overlaid with the profile after the work is completed.
On a construction website, this information is often spread across several articles. The sitemap then becomes a useful cross-navigation tool: it lets you move from a guide to site plans to an article on planting requirements, then to a guide to utility connections, without losing track.
You don’t need any particular technical skills to navigate a construction website. The sitemap is still the most reliable shortcut to specific content, especially when the site covers dozens of topics, from building permits to interior finishes. Getting into the habit of checking this page before starting an internal search can save you valuable time, article after article.



